✔ ETL Certified Power Unit — Independently Verified Safety Standard
The LR06's power unit carries ETL certification — an independently verified safety standard. The LR06 carries ETL certification where the higher-capacity LR10 does not — an important distinction for shops and operations where certification matters.
✔ 6,000 lb Capacity — Compact Low-Rise Platform
At 6,000 lbs, the LR06 handles most passenger cars and light-duty vehicles on a rugged platform with hard-rubber lifting pads for stable, secure lifting at low height.
✔ 4 1/8" Minimum Height — Low-Clearance Vehicle Access
At 4 1/8 inches of minimum height, the LR06 drives under low-clearance vehicles, sports cars, and vehicles with front lips without ramps or blocks.
✔ 24 3/16" Maximum Lift Height — Tire, Brake, and Body Work
Raises to 24 3/16 inches — the working range for tire rotations, brake jobs, suspension work, and body repairs close to the ground.
✔ Automatic Gravitational Lock-Release Mechanism
Mechanical locks with multiple lock points hold the vehicle securely at height. The automatic gravitational lock-release mechanism releases the locks cleanly without additional tools, cables, or air supply.
✔ Narrower and Lighter Than the LR10
At 70 1/16 inches overall width and 827 lbs gross weight — narrower and lighter than the LR10 at 77 15/16 inches and 1,052 lbs. The LR06 fits tighter bays and moves more easily between positions.
✔ Portable — Newly Designed Dolly and Detachable Power Unit Stand
A newly designed dolly and exclusively designed detachable power unit stand with manual safety release let one person reposition the LR06 between bays or push it aside when the floor is needed.
✔ Dual-Approach Ramps — Maximum Space Efficiency
Dual-approach ramps allow the vehicle to drive on from either direction — no awkward repositioning of the lift to match the vehicle's approach angle.
✔ No Ceiling Requirement
The LR06 adds no structure above the vehicle. Whatever ceiling height you have, the LR06 fits — no ceiling calculation required before ordering.
✔ 110V Plug-In — Standard Power Supply
Runs on standard 110V power with a 1.0 HP ETL certified motor. No dedicated circuit, no electrician, no electrical upgrade required. Full lift cycle in approximately 56 seconds.
