Rolling bridge jacks ride on the runways of a four-post or scissor lift and raise the vehicle off the platform by its lift points, so you can pull wheels, do brakes and work on suspension without moving the car to another lift. We carry Triumph and AMGO bridge jacks from 3,500 to 10,000 lbs.
Fit comes down to your lift's runway spacing. Each jack spans a set range, and if your lift falls outside it, the jack will not fit. The Triumph SJ-35 is made only for the NSS-8 and NSS-8XLT. The AMGO RJ-6A, RJ-8A and RJ-10A are air-powered and need a compressed air supply; the RJ-6H and SJ-35 use a hand pump. Read our rolling bridge jack buying guide, browse four-post lifts, or send us your lift model through the Free Fit Check. Call or text 1-800-771-1278.
AMGO RJ-10A 10,000 lb — The Heavy-Duty Rolling Bridge Jack for High-Capacity Four-Post and Scissor Lifts The AMGO RJ-10A 10,000 lb Pneumatic Ro...
View full details
AMGO RJ-6H 6,000 lb — Manual Hand Pump Rolling Bridge Jack for Four-Post and Scissor Lifts The AMGO RJ-6H 6,000 lb Manual Rolling Bridge Jack i...
View full details
AMGO RJ-8A 8,000 lb — Heavy-Duty Pneumatic Bridge Jack for Full-Size Pickups and Commercial Bays The AMGO RJ-8A 8,000 lb Pneumatic Rolling Brid...
View full details
AMGO RJ-6A 6,000 lb — The Pneumatic Rolling Bridge Jack for Four-Post and Scissor Lifts The AMGO RJ-6A 6,000 lb Pneumatic Rolling Bridge Jack i...
View full details
Triumph SJ-35 3,500 lb — The Bridge Jack That Turns Your NSS-8 Into a Full Service Lift The Triumph SJ-35 is a 3,500 lb sliding bridge jack bui...
View full details
Triumph RJ-5000 5,000 lb — The Rolling Bridge Jack That Turns Your Four-Post Into a Full Service Lift The Triumph RJ-5000 5,000 ...
View full detailsThis is the one measurement that decides fit, and no adapter corrects a mismatch. Measure your own lift before ordering.
A bridge jack lifts one end of the vehicle, within the lift's own rated capacity. The SJ-35 is rated at 3,500 lbs, the RJ-5000 at 5,000 lbs, the RJ-6A and RJ-6H at 6,000 lbs, the RJ-8A at 8,000 lbs and the RJ-10A at 10,000 lbs. The RJ-8A and RJ-10A are aimed at full-size pickups, large SUVs and heavier vehicles.
The RJ-6A, RJ-8A and RJ-10A use a pneumatic pump and need an air supply of 0.8 MPa, about 116 PSI, at the lift. The RJ-6H is the hand-pump version of the RJ-6A with the same specifications, and it can also work on the floor as a standard rolling jack. The SJ-35 uses a manual pump and needs no shop air or electrical hookup.
Only if your lift's runway spacing falls inside the jack's range. Give us your lift model and measurements through the Free Fit Check and we will confirm.
Both the SJ-35 and the RJ-5000 are made for it. The RJ-5000 also fits the NSS-11.
For the RJ-6A, RJ-8A and RJ-10A, yes. The RJ-6H and SJ-35 are hand-operated and need no air.
It varies by model. Without adapters, the RJ-5000 reaches 22.5 inches, the RJ-6A and RJ-6H 17 3/4 inches, the RJ-8A 21 3/16 inches and the RJ-10A 21 1/2 inches. Adapters add height where a vehicle's lift points sit higher above the runway. The RJ-5000 includes one set of 4-inch height adapters, and the RJ-8A and RJ-10A come with a bracket that keeps adapters with the jack. Full figures are on each product page.
Send us your ceiling height, bay size and power, and we'll confirm which rolling jacks fit before you buy. Free.
Proud authorized dealer
Full manufacturer warranty on every unit.
