Proudly American-Owned & Operated · Woman-Owned · Family-Run American, Woman & Family-Owned

Skip to content

Triumph NSS8X-1 | 8,000 lb Four-Post Car Lift | Lift-Gate Delivery

by Triumph
$3,425.00

Call for better pricing on this item: 1-800-771-1278

0% APR Financing available Pay over time with Shop Pay Installments. Rates from 0% APR, subject to eligibility.

Choose free pickup, request a freight quote, or check Buy now, quote later to add this to your cart. Choose free pickup, or answer the delivery questions below, to add this to your cart.

Have questions about delivery or warehouse pickup? Call or text 1-800-771-1278.

Notify me when back in stock

Why shops buy from Bay 1

The Bay 1 Promise

American-owned, woman-owned & family-run. Here's what comes with every order.

Lifetime Support. For as long as you own it. Setup questions, troubleshooting, parts help. Call, text or email a real equipment pro anytime, years after the sale.
Need it installed? We'll connect you with a trusted installer in your area. Installation info
Talk to a real equipment pro Get help matching a lift to your ceiling, slab and vehicles.
Holly, founder of Bay One Auto Equipment

From the founder

Hi, I'm Holly. I own this company.

If anything about your order isn't right, I want to hear about it. Email me directly and I'll personally make it right.

Triumph NSS8X-1 8,000 lb — The Four-Post Car Lift Delivered to Your Door, No Forklift Required

The Triumph NSS8X-1 8,000 lb Four-Post Car Lift is the same proven lift as the standard NSS-8 — same 8,000 lb capacity, same 72-inch lift height, same 110V plug-in operation — built and shipped specifically for buyers with no forklift, no loading dock, and no heavy machinery at their delivery address.

The NSS8X-1 ships in two pieces. A lift-gate service unloads both pieces at your location. Two people can unpackage and assemble the lift without any heavy machinery. The runways and crossrails are reinforced at the assembly joints with bolted reinforcement plates so the lift holds its full 8,000 lb rated capacity once assembled — the same load path as a one-piece lift, broken only at the seams that make residential delivery possible.

Raise vehicles to a 72-inch lift height in approximately 40 seconds on standard 110V power. Stack a second vehicle underneath for storage, or use the working height for fluid changes, brake jobs, and underbody inspection. Ships complete with a caster kit, jack tray, and three drip trays — everything included in the box.

Triumph NSS8X-1 Four-Post Lift showing lift-gate delivery, two-piece assembly, 110V plug-in, 10 locking positions, and included caster kit

Why Buy From Bay One Auto Equipment?

Price Match Guarantee

Price Match Guarantee

Best Prices Online, Guaranteed

Placeholder Image

30 Day Easy Returns

No Questions Asked

Expert Support

Expert Support

Real People, Real Answers

Satisfaction GuaranteedSatisfaction Guaranteed

Satisfaction Guaranteed

Quality Products, Backed by Us


What Makes the Triumph NSS8X-1 Four-Post Car Lift Stand Out

✔ Lift-Gate Delivery — No Forklift Required

The NSS8X-1 ships in two pieces specifically so it can be delivered to addresses with no forklift, no loading dock, and no heavy machinery. A lift-gate service unloads both pieces at your location. This is the single feature that separates the NSS8X-1 from the standard NSS-8 — the same lift, delivered where a standard freight drop cannot go.

✔ Two-Person Assembly — No Heavy Machinery Needed

Two people can unpackage and assemble the NSS8X-1 without any heavy lifting equipment. The two-piece design breaks the lift at the runway joints and crossrails — manageable pieces that two people handle without a crew or a machine.

✔ Reinforced Runways and Crossrails — Full 8,000 lb Capacity

The runways and crossrails are reinforced at the assembly joints with bolted reinforcement plates. The load path is the same as a one-piece lift — the reinforcement ensures the NSS8X-1 holds its full 8,000 lb rated capacity once assembled. No compromise on strength for the convenience of residential delivery.

✔ 10-Position Automatic Lock Ladder — Single-Point Release

Ten automatic locking positions engage as the lift rises. The vehicle rests on mechanical steel locks rather than hydraulic pressure — the right choice for a lift that holds a vehicle for months rather than minutes. A single-point release drops all four columns together from one location — no walking around the lift to free each post individually.

✔ 72-Inch Lift Height — 69 Inches of Working Clearance

Lift height at the top of the runway is 72 inches. Height under the runway is 69 inches — the space you work in with the deck over your head. A passenger car parks cleanly underneath while you walk through the bay without ducking.

✔ 110V Plug-In Operation — Standard Garage Outlet

Runs on standard 110V household power from a normal garage outlet. No electrician, no dedicated circuit, no delay between delivery and first use. Full lift cycle completes in approximately 40 seconds.

✔ Caster Kit, Jack Tray & Three Drip Trays — All Included

Caster kit for repositioning the assembled lift around the garage. Jack tray for one-end service with a standard bottle or floor jack. Three drip trays to catch oil, coolant, and brake fluid from the upper vehicle before they reach the one parked below. All three included in the box at no extra charge.

Triumph NSS8X-1 Four-Post Lift front view with aluminum ramps in a garage

The Triumph NSS8X-1 Fits Most Garages — Here's How to Confirm Yours

Ceiling Height

The NSS8X-1 stands 84 inches tall at the columns. If you're planning to stack two vehicles, your ceiling needs to clear the roof of whatever is sitting on the upper runway at your chosen lock height. Measure your actual vehicles — don't estimate.

Floor Length

The NSS8X-1 runs 175 inches overall. Add walking clearance at both ends before deciding it fits and account for ramp storage when the ramps are off the lift.

Floor Width

The overall base width is 106 inches — just under 9 feet. In a single-car garage this is usually the measurement that decides yes or no — check it first.

Drive-Thru Width

The drive-thru opening between the posts is 93 inches. Runways are 18 inches wide, sitting 37 inches apart, and run 165 inches in length.

Power

Runs on 110V standard power from a normal garage outlet. No dedicated circuit, no electrician, no delay between delivery and first use.

Foundation

Triumph's installation manual covers the concrete and anchoring requirements for this lift.

Triumph NSS8X-1 Four-Post Lift raised in a garage with the caster kit installed

Triumph SJ-35 Storage Lift Bridge Jack (Optional)

The Triumph SJ-35 is designed specifically for the NSS-8 lift only. It slides into the runway gap to give you wheels-off access for brake jobs, tire rotations, and suspension work without removing the vehicle from the lift.

Operated by manual pump, the SJ-35 raises from a collapsed pad height of 4.75 inches up to 11 inches, with extensions available up to 16.5 inches. The adjustable pad width spans 31 inches to 46 inches, fitting the NSS-8's 37-inch between-runway gap cleanly.

  • NSS-8 compatible only
  • Manual pump operation — no air or power supply needed
  • Pad height: 4.75" collapsed / 11" extended / 16.5" with extensions
  • Adjustable pad width: 31" min / 46" max
Triumph NSS8X-1 Four-Post Lift with optional SJ-35 sliding bridge jack shown

What's Included With Your NSS8X-1 Car Lift

Everything you need is included with your Triumph NSS8X-1 and more!

  • Triumph NSS8X-1 Four-Post Car Lift
  • Two Diamond-Plate Runways
  • Reinforced Assembly Joints
  • Two Reinforced Crossrails
  • 110V Hydraulic Power Unit
  • Approach Ramps
  • Caster Kit
  • Jack Tray
  • Three Drip Trays
  • 1-Year Warranty

Triumph NSS8X-1 | 8,000 lb Four-Post Car Lift Technical Specifications

Manufacturer Triumph
Lifting Capacity 8,000 lbs
Lift Height 72"
Height Under Runway 69"
Lift Time 40 seconds
Locking Positions 10
Lock Release Single Point
Overall Height 84"
Overall Width 106"
Drive-Thru Width 93"
Between Runways 37"
Runway Width 18"
Runway Length 165"
Overall Length 175"
Lowered Height 5"
Base Plate Size 12" x 12"
Voltage 110V
Shipping Weight 1,600 lbs
Warranty 1-Year Warranty on Parts



FAQ

Questions about the Triumph NSS8X-1

What is the difference between the NSS8X-1 and the standard NSS-8?

The NSS8X-1 and NSS-8 are the same lift in terms of capacity, dimensions, and specifications. The difference is shipping and delivery. The NSS8X-1 ships in two pieces with lift-gate delivery service — no forklift or heavy machinery is required at your location. The standard NSS-8 ships as a standard LTL freight delivery that requires a forklift or similar equipment to unload.

Do I need a forklift to receive the NSS8X-1?

No. The NSS8X-1 ships with lift-gate delivery service. The lift-gate unloads both pieces at your location. No forklift, no loading dock, and no heavy machinery is required at your delivery address.

How many people does it take to assemble the NSS8X-1?

Two people can unpackage and assemble the NSS8X-1 without any heavy machinery. The two-piece design breaks the lift at the runway joints and crossrails into manageable pieces for a two-person assembly.

Does the two-piece design affect the lift's strength or capacity?

No. The runways and crossrails are reinforced at the assembly joints with bolted reinforcement plates. The NSS8X-1 holds its full 8,000 lb rated capacity once assembled — the same load path as a one-piece lift.

Does the NSS8X-1 need to be permanently anchored to the floor?

No permanent installation is required. The NSS8X-1 is a free-standing portable lift. The included caster kit lets you reposition the assembled lift around your garage whenever your layout changes.

Still have a question? Call us at 1-800-771-1278 or email support@bayoneautoequipment.com